Before it is started, a reserved Cloud session can be modified in the Online Cloud Consolewith the Load Generators > My Cloud sessions command.
For a reserved session, a click on the Edit command displays the My reservations / Edit session screen.
Every parameter of the Cloud session, but the owning workgroup, can be modified.
The Workgroup selection section defines which workgroup account is used for the session:
Name is a drop-down list of the workgroups which the connected user belongs to.
The Session definition section describes the session:
Name is the mandatory label of the session.
NeoLoad Version is the version of the NeoLoad Controller which is used to start the test with the Cloud Load Generators. When the NeoLoad Controller is patched with a hotfix, the Unofficial version option must be selected and the Build Number must be specified. The version of the NeoLoad Controller is available with Help > About NeoLoad in the Controller.
Information: VUHs are available for purchase from NeoLoad version 5.2.4 and later.
The Send notification emails section makes it possible to set automated emails to To, Cc, and Bcc people about the Cloud session in the selected Language:
when the session is started
30 minutes before the end of the session
a few minutes before the end of the session
when the session is over
if a problem occurs on the session
when a reserved Cloud session is created, modified, or canceled
The Schedule section is used to set the duration of the session:
Start date is the day and time when the Cloud Load Generators must be up and running. A click on the calendar icon makes it possible to select a date and the time before clicking on Apply. For information purposes, the time zone is stated in the upper right corner of the page.
Duration is the length in hours of the session.
The Load Generators section is different if you are paying with Cloud credits or VUHs:
If you are paying with Cloud credits, you need to choose the type, location, and number of Cloud Load Generators.
If you are paying with VUH, you need to choose the location, and number of Virtual Users.
Type is the dimension of the Cloud Load Generators:
Medium Load Generators rely on two cores and 800 MB of allocated memory. One medium Load Generator requires one Cloud credit per hour.
Large Load Generators rely on four cores and 6 GB of allocated memory. One large Load Generator requires two Cloud credits per hour.
The characteristics of the medium and large Load Generators may differ with the zone used.
The Use reserved IP addresses option is selected by default in case IP addresses have been reserved for the session. It is still possible to uncheck it if different IP addresses are to be used for this Cloud session.
The table lists the worldwide Cloud zones available. For every Zone:
In the Zone column, if one or several IP addresses have been reserved in that zone, a calendar icon is displayed. On mouse over the applicable zone, a tooltip gives the number of IP addresses reserved.
If you are paying with Cloud credits: In the Load Generators column, the Required field makes it possible to enter a number of Cloud Load Generators. The maximum number of Cloud Load Generators available is displayed in the Available column. By default, in most zones, a maximum number of 25 Cloud Load Generators can be started. For more Load Generators on a zone, contact your Neotys Account Manager.
If you are paying with VUHs: In the Virtual Users column, the Required field makes it possible to enter a number of Virtual Users. The necessary number of Cloud Load Generators is automatically updated in the Required field of the Load Generators column.
The Observed startup times column provides information about the time required by a Cloud Load Generator for a given zone before it is up and running. The statistics derive from experienced times recorded by Neotys. The Median measure is the most realistic startup time. The Max measure is the longest time a Neotys Cloud Platform user had to wait before the Load Generator was ready.
Information: A session is made of either medium or large Load Generators. When necessary, distinct sessions can be created and used for a test.
Tip: Moving the mouse over a zone displays a tooltip with additional information like the name of the Cloud provider, the minimum startup time observed, and the percentage of Cloud Load Generators in error on startup.
The Cost section shows the Available balance in Cloud credits or VUHs against the balance Reserved for this session according to the duration, type, zones, and number of Load Generators selected above. If credits or VUHs are missing for the Load Generators or Virtual Users selected, the information is displayed in red, and a link gives access to the Neotys Online Store to add more credits or VUHs on the fly.
A click on the Validate button enforces the new parameters of the reserved Cloud session.
In the NeoLoad Controller, with the Open Cloud Console toolbar button, then with theOnline Cloud Consolelink.
Enter your E-mail and Password. Click Sign-In.
Choose Reservation > My reservations.
Select the reserved session to modify.
In the My reservations / Edit session screen:
In Session definition:
You can change the Name of the Cloud session.
You can change the NeoLoad Version of your NeoLoad Controller.
If your Controller has been patched, click Unofficial version, and specify the Build Number.
To find the version and the build number, in the NeoLoad Controller, choose Help > About NeoLoad.
You can change the email addresses for the To, Cc, and Bcc Cloud notifications. You can change the email Language.
In Start Date, you can click on the calendar icon, redefine the day and time of your test, then click Apply.
In Duration, you can change the number of hours for the session.
In Reserve IP addresses in advance, you can select whether you want the IP addresses of the Cloud Load Generators before the test.
In Load Generators:
Cloud credits only: In the Type drop-down list, select Medium to have the list of Load Generators with two cores and 800 MB of allocated memory, or Large to update the list of Load Generators with four cores and 6 GB of allocated memory.
In the table displaying the Cloud Load Generators, select a Zone and enter the number of Cloud Load Generators or select a Zone and enter the number of Virtual Users. Click Next.
In Cost, check that you have enough credits/VUHs for this change.