Use the button array to the right of the User Path tree. You can move the SAP Action up or down the tree using the Up and Down buttons in the button array. Use the > button to place the SAP Action in last position in the first container encountered above the SAP Action. Use the < button to place the SAP Action immediately after its parent.
Drag and drop. When dropping, there are three target zones: the top zone indicates that the moved element will be inserted above the target element; the middle zone indicates that the moved element will be inserted inside the target element; and the bottom zone indicates that the moved element will be inserted below the target element. When over the middle zone, the target element is only highlighted if insertion is allowed. In the case of the top or bottom zone, a hyphen is displayed to show that the insertion is allowed.